Black Forest+ laminate in Sun Kissed Oak in a bedroom suite

Laminate Flooring Installation

Laminate Flooring, Installed Properly

Hard-wearing wood-look laminate that clicks together over an underlay. Six Finfloor ranges from 8 mm to 12 mm, rated AC3 to AC5, fitted with matching trims across Gauteng.

  • 6 Finfloor ranges
  • AC3 to AC5 rated
  • Matching trims

Shown: Black Forest+ laminate, Sun Kissed Oak

Is It for You?

Where laminate works best

01

Busy family homes

A tough wear layer that stands up to kids, pets and furniture. AC ratings tell you how tough: AC5 is rated for heavy commercial use.

02

Bedrooms and living areas

Laid over an underlay, so it’s warmer underfoot than tiles.

03

Rentals and offices

Hard-wearing and easy to keep clean, with ranges rated for commercial traffic.

04

Not for wet rooms

Laminate doesn’t like standing water. For kitchens and bathrooms, look at SPC or vinyl.

AGT Natura Line laminate flooring

The AC Rating

How tough do you need?

Laminate is graded for wear. AC3 suits most homes and moderate commercial use, AC4 handles general commercial traffic, and AC5 is made for heavy commercial floors.

Our ranges cover all three, from AGT Bella Neo (AC3) to Black Forest+ and Parador Trendtime 6 (AC5).

  • AC3: heavy domestic, moderate commercial
  • AC4: heavy domestic, general commercial
  • AC5: heavy domestic, heavy commercial

How It Works

How we install laminate

01

Assessment

We visit, measure up, check the floor underneath and talk through the ranges and colours. You get a detailed, no-obligation quote by email with fully transparent pricing.

02

Preparation

We check the screed underneath is solid, level and dry, repair or level any weak or uneven areas, and lay a moisture barrier where it’s needed.

03

Installation

The floor is laid the way Finfloor specifies for that range, with the right underlay or adhesive and the expansion gaps it needs.

04

Trims and Finishing

Colour-matched trims and profiles finish the edges and doorways. New skirting is quoted separately, or we carefully lift and reuse yours if it’s in good condition.

05

Handover

We check the job with you and leave you the care guide for your floor, so it stays looking new.

Reviews

What Our Clients Say

Questions

Laminate questions

Is laminate waterproof?

No. Some ranges resist surface water for a while (Black Forest+ for 72 hours), but standing water, leaks and flooding will damage it. For wet areas, SPC is the better choice.

What does the AC rating mean?

It’s the wear grade. AC3 is fine for homes and moderate commercial use, AC4 for general commercial, and AC5 for heavy commercial traffic.

Can laminate go over tiles?

Usually, yes, if the tiles are solid and flat with none loose, because laminate floats over an underlay. Deep grout lines or damaged tiles may need levelling first. We check at the assessment.

Can laminate be sanded?

No. The look is a printed layer under a wear layer, so it can’t be sanded like real wood. If you want a floor you can refinish later, look at engineered wood.

How do I look after it?

Sweep or vacuum (no beater bar), and clean with a well-wrung, slightly damp microfibre mop. No wax, polish or steam mops.

SupplyInstallRestore

Ready for
New Laminate?

Tell us about the rooms and we’ll measure up and quote for the floor, underlay, trims and fitting.

Spread the cost with Evolution Finance monthly payments.

+27 79 564 2525info@floorcrew.co.za